Model seating and freestanding walls, counters, raised planters,
pillars, and fire features. Plan outdoor lighting and mark utility
locations.
What you can build
Seating walls.
Draw straight and curved seating-wall paths with standard blocks,
natural stone, or solid-wall geometry. Adjust courses, caps, and
insert pillars.
Edit Wall.
Adjust courses, wall-owned pillars, and arc curves. Split
supported straight spans or extend the saved path end.
Freestanding walls.
Model boundary and partition walls with block, natural-stone, or
solid-wall construction. Add caps, pillars, and
supported stepped profiles. Edit Wall also works with these walls.
Switch Cap Corner.
Change the cap arrangement at supported seating and
freestanding wall corners.
Counters for outdoor kitchens.
Draw counter footprints with block or solid bases and natural-stone
or proxy countertops. Choose single-piece or slab-piece layouts,
corner joints, thickness, and overhangs.
Countertop Opening.
Mark or cut supported openings for grills, sinks, appliances,
or generic cutouts.
Face Opening.
Place opening markers or cut supported openings in counter faces.
Raised planters.
Draw a closed planter footprint with block or solid walls. Configure
standard-block or natural-stone units, caps, wall height, and the
planting surface.
Edit Footprint.
Move edges and refine a saved planter footprint with its
dedicated editor. Counter footprints have their own editor too.
Pillars.
Build capped pillars with standard blocks, natural stone, or solid
geometry. Adjust their footprint, courses, and cap settings.
Pillar Courses.
Add or remove courses on supported standalone and wall-owned
pillars.
Fire features.
Model circular, square, or rectangular fire pits and custom or preset
fireplace assemblies. Configure the applicable caps, hearth,
firebox, and chimney options.
Outdoor lighting.
Lay out path, wall, step, pillar, and counter lights or uplights with
wire paths and supported branches. Include conduit and an optional
transformer model.
Edit Fixtures.
Move and rotate fixtures. Adjust conceptual beam direction,
angle, and source position.
Edit Wire Path.
Refine supported wire paths and leaf branches.
Edit Conduit Spans.
Adjust conduit along supported main-run and branch spans.
Utility Markers.
Mark utility locations with flat 2D symbols or 3D proxies, including
gas, water, electrical, and drainage. Draw routes and areas for
coordination, with existing or proposed status.
Edit Utility Markers, Routes, and Areas.
Use their dedicated editors to adjust supported markers, route
paths, and area boundaries.
Materials.
Choose preset or custom solid colors for blocks, natural stone,
caps, countertops, hearths, firebox liners, metal parts, and lighting.
Apply colors to supported selected Outdoor Living objects.
How it works
Choose your settings. Choose the Builder, dimensions, construction or fixture options, and materials.
Draw
Draw a wall path or footprint, or place the selected feature.
Edit
Select an existing feature and use its supported editing tools to refine the layout.
Rebuild
Apply changed settings with Rebuild Selected on a compatible object.